Article Index: 015
BTL
- Barrier – slide-insert
- Ideal where space is a problem
- Designed for installation within the jamb
|
Dimensions |
|
|
Standard height: |
400–500 mm |
|
Standard length: |
750–6000 mm |
|
Special situations: |
upon request |
|
Width: |
50 mm |
Suitable for crack-free surfaces with up to 15 mm (± 7.5 mm) of floor/ground unevenness, e.g. concrete, corrugated sheet metal, tiles, stones, etc.
The closure barrier is comprised of a rectangular, integral hollow aluminium profiled body. A compressible, highly adaptable special seal is affixed to the lower side.
The barrier mounts are “U”-shaped and are particularly narrow in their design. By way of preference, they are securely and universally mounted within the jamb of a door/gate, between walls, etc. and tightly sealed against the building or structure. Mounting outside of the doorjamb is also possible with a special version.
Two swivelling tension levers are attached on the body of the barrier by means of four fixing devices. With these tension levers, the necessary force can be applied with respect to the guide rails and the floor/ground to secure the body of the barrier into place. The contact pressure is adjustable. The levers lock into place.
Wall mounts are included in the product package to provide for orderly storage.
Barrier bodies and mounting fixtures are furnished with a red paint finish, preferably “traffic red” RAL 3020. The remaining metal components are galvanized or made of aluminium.